How To Install Malwarebytes Antivirus

  • Open any browser like Chrome, Safari, Firefox, Internet Explorer, etc., on your system.
  • Navigate to the manufacturer’s website. On the home page of this website, you can see two options namely, Free Download and Premium.
  • Choose Free Download to download the setup file.
  • You will be directed to another page. Press on the Click Here option.
  • Once the download is complete, click Run or a similar option depending on the browser you use.
  • Some browsers may prompt you to choose an option immediately after downloading the setup file. On the other hand, some may display an alert message before downloading the setup file.
  • In some cases, you will have to double-click on the setup file to begin the installation of the software.
  • Click the Run option and wait until the installation is completed.
  • To proceed further with the installation, read and accept the Terms and Conditions displayed on the screen of your system.
malwarebytes-antivirus
  • Click Next and proceed with the on-screen instructions.
  • Once the process is complete, scan, detect, and resolve the problematic drive or disk.

Install Malwarebytes Antivirus Windows

  • Download the setup file from the manufacturer’s site. Click Run after double-clicking the file.
  • Choose a language of your choice and then click OK.
  • Click Next on the Malwarebytes Anti-Malware Setup wizard.
  • Go through and then accept the License Agreement to proceed with the setup.
  • Click Next and follow the guidelines given on screen.
  • Continue with the installation by clicking Next.
  • Choose the Install option on the Ready to Install dialog box.
  • Press the Finish button to complete the software installation process.

Install Malwarebytes Antivirus Mac

  • Make sure to download and install the latest version of Malwarebytes software.
  • Double-click on the .dmg setup file from the Downloads folder.
  • Drag and drop this Malwarebytes software into the Applications folder.
  • Once the file is copied, click File ----→ Eject Anti-Malware for Mac.
  • Go to Applications on your Mac device and click on the Eject Anti-Malware for Mac option.
  • Click on the Open option, key in the username and password, then click Install Helper.
  • Install the software and start using the same.

Steps To Activate Malwarebytes

  • You must have the premium license key to activate Malwarebytes on your system.
  • The license key will be sent in the order confirmation email.
  • Install the Malwarebytes software on your system before activating the license.
  • Now, open the software on your system and click on the Activate License option.
  • Move your cursor and click on the text box under the License key browser.
  • Enter the key correctly to proceed further. Click on the checkbox with the message “ My License Came With a License ID,” if you have an ID.
  • Click on the Activate License option and the premium version will be activated on your system.

How To Enable Real-Time Protection In Malwarebytes

  • You can turn on Real-time protection in Malwarebytes only if you have its premium version.
  • By enabling this feature, the software will protect your system in real-time and will intimate you regarding suspicious activities on your system.
  • Launch the Malwarebytes application and click on the Settings option.
  • Click on the Protection tab in the Application menu.
  • Click the toggle switches under the Real-time section. There will be four sections, click on each toggle to turn the features on.
  • In case you want to turn it off, just toggle it off.
  • A User Account Control window will open if any protection is turned off, click on the Yes button to confirm the same.

How To Protect
Additional Devices

Be it a single device or multiple devices, you will have to subscribe to premium membership to enable or activate the Malwarebytes software. If you have activated the software and confused with how many devices you can protect, check the invoice and get clarified.

  • For personal use, you can add up to 10 devices, where the yearly subscription amount for 1 device starts from $50.
  • If you want to use the software for business purpose, then you can choose a plan that suits your business and is more comfortable to use. Prices may vary with respect to the number of devices you add to the plan.

How to scan
Detect Malware in Malwarebytes?

  • You can schedule an automatic scan until your Windows computer is turned on.
  • Launch the Malwarebytes Antivirus software on your computer.
  • Click the Scan option on the left side of the window and then select Scan Type.
  • Choose one of Threat, Custom, or Hyper Scan.
  • Now, click on the Start Scan tab.
  • After the scan is complete, the Scan tab displays the message Your Scan is complete.
  • A Dashboard window opens displaying the total number of scan detections on your computer screen.
  • If malware is identified on your Windows computer, Malwarebytes comes up with a list of threats and fixes them.

How to Setup Custom Malwarebytes Scan?

  • Open the Malwarebytes antivirus software and click on the Scan option.
  • From the Threat, Custom, or Hyper scan type, select Custom and click on Configure Scan.
  • The moment you click on it, a window opens allowing you to choose the list of files to be scanned and the computer drive in which you want to initiate the scan.
  • Click on Scan Now and wait for the software to progress the scan.
  • After the scan is complete, you will be notified with the results in the Dashboard window.
  • You can check whether your computer is clean, contains threats and if the issues have been fixed.

How to Setup Schedule Malwarebytes Scan?

  • To set up an automatic scan schedule, first, launch the Antivirus software-Malwarebytes.
  • Select Settings and click Scan Schedule from the set of tabs that display on the screen.
  • To create a new scan schedule, click Add and key in your preferred date, time, frequency, and recurrence of the scan in the window that appears.
  • In case you wish to modify an existing scan schedule, click Edit.
  • In the Edit Scheduled Scan window, alter the date, time, frequency, and recurrence.
  • Finally, click OK to confirm the changes you have made.
  • p Advanced Scan in Malwarebytes.
  • Launch the Malwarebytes Antivirus software and click Settings on the homescreen.
  • Select Automated Scheduling and click on Add to create a new schedule.
  • For Advanced Scan options, click the Advanced drop-down menu.
  • Choose the preferred scan method and other scan schedule options such as date, time, frequency, and more.
  • By choosing the Advanced Scan options, you get to view more results such as quarantining all threats automatically, auto- restart of the computer after removing threats, rootkits scanning, and scanning of archived files.
  • After defining your required settings, click OK. This will schedule the Advanced Scan option on your computer.

How To Activate Play Mode In Malwarebytes?

  • First, open the Malwarebytes application.
  • On the home screen, under Settings, click the Application tab.
  • Under the Play mode section, turn on the Automatically Enable Play Mode when a selected app is detected option and make it default.
  • If you do not wish to enable it, you can slide the switch to Off and disable the option.

How To Manage Quarantined Files In Malwarebytes

To manage Quarantine files in Malwarebytes, follow the procedure given below.

  • Sign into the Malwarebytes account on your computer.
  • Click the Client Pane available at the top-right corner of the screen.
  • Choose the files you wish to Remove, Restore, or Download from the list.
  • Now, tap on the Security Logs tab and right-click on the files you want to restore/remove/download.
  • Click the Remove, Restore, or Download option as per your need.
  • Finally, check if the set task is done correctly.

How To Delete a Virus Quarantine File Location

To delete a virus quarantined file location using Malwarebytes antivirus software, follow the instructions given below.

  • Open the Malwarebytes antivirus software on your computer.
  • Search for the option that allows you to manage quarantined items.
  • Select the file that is defective from the list and highlight it by clicking on it.
  • You can see the Delete, Restore, or Download Quarantined files option at the bottom of the screen.
  • Click the Delete button.
  • Now the highlighted files will be deleted from the folder.

Restore Default Settings In Malwarebytes

To restore default settings using Malwarebytes software, follow the instructions given below.

  • First of all, open the Malwarebytes application on your computer.
  • To open Malwarebytes, locate the file and double-click on it.
  • Wait for the Malwarebytes home page to open.
  • Now you will see the Restore Default option at the top-right corner of the screen. Click on it to begin the restore process begins.
  • Once the restoration is complete, set the Application settings as per your need.
  • To set the Application and Notification settings, tap the Application tab near the Protection setting.
  • Enable the options that you need and click the Save button.
  • Similarly, click each tab and set the settings as per your requirement.

How To Renew Malwarebytes License

To renew the Malwarebytes license, perform any one of the methods given below.

  • You can renew the Malwarebytes license using PayPal. PayPal offers two different ways to renew the license.
  • The two different ways are Billing agreement and Direct through PayPal.
  • If you enable the Automatic Renewal option, then you can use the Billing agreement method to renew the license.
  • The automatic renewal option is available only after one year of your original purchase.
  • The renewal process may take 24 hours. During the renewal period, the program shows that the license is expired and after 24 hours, the program displays the active status.
  • If you have not set the Paypal billing agreement during the previous purchase, then you will need to authorize your PayPal payment.
  • Once you complete the authorization process, you will receive an email message with a link attached. Open the link and make the payment.

How to Uninstall Malwarebytes Completely

To uninstall Malwarebytes on your Mac device, follow the instructions given below.

  • First, you have to download Malwarebytes removal software.
  • The removal software is available for download.
  • After downloading the software, open it by double-clicking on the downloaded file.
  • Wait for the Malwarebytes home page to open.
  • Click the Continue button on the home page.
  • Click the Install button at the bottom of the screen.
  • Enter the authentication details in the required field and click the Install Software option.
  • Click the Close button once the uninstall process is complete.

Troubleshooting

How To Use Malwarebytes Support Tool

  • Download the Malwarebytes support tool from an authorized site.
  • Double-click the downloaded file and click Yes on the User Account Control window.
  • Read the license agreement and tick the box next to the Accept License Agreement option. Click Next.
  • The Malwarebytes support tool application launches.
  • The menu pane on the left holds the functions (Repair, Upload Logs, Advanced) that you want to perform using the antivirus tool.
  • Clicking an option from the menu will display the related settings on the left pane.
  • From the right pane, select a function that you want to operate.

Turn Off Upgrade Notifications In Malwarebytes For Windows

  • Your Windows system will receive upgrade notifications whenever a new version of the software is available.
  • If you don't want to receive such notifications, you can turn them off.
  • Launch the Malwarebytes application user-interface.
  • Select Settings from the left pane.
  • Move to the top of the window and select the Application tab.
  • Navigate to the Application Updates segment.
  • Slide the toggle below the Notify me when full version updates are available option to disable the upgrade notification.

Malwarebytes Installation Fails With Runtime Error

  • If the Runtime error occurs at the time of installing the Malwarebytes application, then perform the following steps.
  • Check if the Malwarebytes application you have downloaded is of the latest version.
  • Press the Windows key and click the Start menu.
  • Enter cmd in the search box to launch the Command Prompt.
  • Right-click on the Command Prompt, and a short menu appears.
  • Select the Run as Administrator option.
  • Type the following commands in the terminal screen. Make sure to press the Enter key at the end of each line.
  • Once you press the Enter key, the Windows Setup Wizard launches.
  • Proceed with the prompts that appear on the screen and complete the installation.

Constant Upgrade Notifications In Malwarebytes

  • In the Windows operating system, click on the windows logo on the keyboard.
  • In the search bar, type Malwarebytes and hit enter button.
  • Open the Malwarebytes software from the search list.
  • Now, click on the settings and then select the “Application” tab.
  • Toggle “Off” the option under notify me when full version updates are available.
  • To upgrade the Malwarebytes software manually in the future, open software.
  • Click setting and then click the application tab.
  • Under the application updates option, click on the Install Application Updates.

Malwarebytes For Windows Context Menu Does Not Work

  • When there are updates available for the Malwarebytes software, update the software immediately.
  • If the system is not rebooted after the update, the software or even system may fail and may not work consistently.
  • Also, the Malwarebytes software for windows context menu may fail to work.
  • Restarting the system will apply the changes and eventually solve the issue.
  • If that didn't work, try installing any previous or updated version of the software.

Cannot Turn On Web Protection In Malwarebytes

  • Open the Malwarebytes software on your Windows OS.
  • Right-click on it and select the "Quit Malwarebytes" option.
  • Then click the "Yes" option when prompted.
  • Now, click on the windows logo from the keyboard and type "cmd" in the search bar.
  • Right-click on the "cmd.exe" option and select "Run as administrator" from the list of results.
  • The command prompt window will open. Type "SC DELETE MBAMWebProtection" and hit enter.
  • Now, open the Malwarebytes software again, and you will notice the web protection option turned on.
  • All the protection settings get disabled when you delete the item in cmd. Turn all of them manually.
  • Now all the functions will work normally.

FAQ's

Malwarebytes Won't Start With Windows

  • The first solution is, try renaming the mbam.exe file as explorer.exe.
  • Try running the Malwarebytes software as an admin. Go to the folder that contains the Malwarebytes software file.
  • Right-click the mbam.exe file and then click on the Properties option from the Contextual menu.
  • Open the Compatibility dialog box, and tick the Run this program as an administrator checkbox, and then save the changes made.
  • Now check if the software works on your Windows personal computer.
  • Run the Malwarebytes app in Safe mode. When the Windows logo displays on the screen, long press the Power button until your computer switches Off completely.
  • Switch On your PC and do the same procedure thrice. When you start your personal computer for the fourth time, the Advanced Recovery tab will display on the screen.
  • Click on the Troubleshoot option, then select Advanced Options, and then choose Startup Settings.
  • Click the Restart button and from the list, select Safe Mode with Networking.
  • Start the Malware app and then scan for viruses. Restart your Windows device and check whether the error is rectified.

Malwarebytes Closing My Browser When I Try To Open Folder

  • The error can occur if there are any issues with the web browser.
  • It can also happen if the folder which you are trying to open has malware and viruses.
  • The solution for the error is to deinstall and then reinstall the web browser.
  • Perform a full scan process on your personal computer using the Malwarebytes software.
  • Open the Malwarebytes Anti-Malware software on your computer and choose the Scanner option.
  • The Scanner dialog box appears on your desktop. Choose either the Quick Scan or Full Scan process and select the Scan option.
  • If you are doing a full scan procedure, choose the disk drive that has to be scanned and select Scan.
  • If the software detects a threat, it will be placed in the quarantine.
  • To delete the virus or malware permanently, select the Delete button.
  • After the scan is done, exit the Malwarebytes window and then check if the issue is cleared.

Hard Drive Failed Replaced Malwarebytes Won't Accept

  • Download the Malwarebytes Support Tool from the official web page.
  • After the tool gets downloaded, go to the Downloads section on your personal computer.
  • Run the program by double-clicking on the appropriate .exe file.
  • A screen might prompt you to make changes to your system.
  • Click on the Yes button and tick the box next to the Accept License Agreement option, and then choose the Next option.
  • The Get Started dialog box displays on the screen. Click on the Advanced section and then select the Gather Logs option.
  • A progress bar will display on your PC.
  • Once the process is complete, a file with a .zip format will open on the screen.

FAQ's

How Do i Trace a Quarantined File Back To Its Host Email Message?

To trace the quarantined file back to the host email message, there is a method to detect it through a system drive scan. But before you do that, you can read up on this common issue that causes this notification to pop up on your computer. This might be due to an infected browser extension that you can find out by googling the infected file’s name. After finding the extension, you can uninstall it and reinstall it from your browser.The scanning option works like this. You import emails to a local drive and scan it using Malwarebytes. The suspected email should be detected by the software through the mail’s odd subject line.

Multiple Attempts To Install Malwarebytes On My Imac Have Failed

    Installation of Malwarebytes might fail due to residual files in the computer from a previous incomplete installation of the software. This issue can be resolved by cleaning up the files using Malwarebytes Mac Uninstall Script. This script can be downloaded from the official Malwarebytes website in the Downloads section. Run the script after decompressing it. Reinstall Malwarebytes and go to the Systems section of the software. From there, go to Security & privacy--→General tab. Check the box beside the statement, ‘Allow apps below to control your computer.’ Now the software loads completely.

Activate Malwarebytes Using Id & Key In Android

  • Download the Malwarebytes application from Google Play Store. Now download the premium key by paying the required fee.
  • From your Android device, tap the App drawer and scroll through the list of applications on your device.
  • Tap the Menu icon from the top left-hand side of the app’s main screen.
  • Tap the Upgrade Now button which has an orange background.
  • Enter your Malwarebytes application’s premium key in the field.
  • Click the Apply button. Malwarebytes is now activated, and premium features are available.