Quick Heal Installer

To configure the Quick Heal Schedule Scan, perform the procedures given below.

• Launch Quick Heal on your computer.
• Tap the Files & Folders option.
• Select the Scan & Schedule option.
• Tap the New button on the Scan Schedule screen.
• Enter the asked information such as Scan Name and scan type in the given field.
• Select the Scan frequency, Priority, and Time options in the Scan Frequency section.
• Specify the scan mode in the Scan settings section.
• Tap the Next button and select the Add Folder button.
• Choose the folders you wish to scan on your computer.
• Tap the Next button on the Configure Scan Schedule screen.
• After setting the options, tap the Finish button.
• Tap the Close button to exit from the Scan Schedule screen.

To enable the Quick Heal installer Internet Protection feature on your computer, follow the instructions given below.

• Start Quick Heal and tap the Internet & Network option on the main screen.
• Tap the Toggle button to enable/disable the Firewall Protection option.
• Click anywhere in the Firewall Protection screen to begin the setting process.
• Set and configure the Firewall settings you wish and click the OK button.

• Carry out the following Quick Heal installation steps to enable and configure Quick Heal firewall settings.
• Click Quick Heal Total Security to open.
• Launch the Quick Heal Total Security Dashboard and then select Internet & Network option from the Dashboard.
• You can turn on or off the Firewall protection feature with the help of the toggle button. Note that by default, Firewall Protection is turned on.
• Now, click anywhere in the Firewall Protection area to set Firewall Protection.
• Turn on Monitor Wi-Fi Networks to enable monitoring of Wi-Fi Networks.
• Connect to the unsecured Wi-Fi connection to enable this option.
• Decide whether you want to connect to unsecured connections. Else, connect to secure connections.

• To block a website in Quick Heal Anti-virus, follow these steps.
• To open “Quick Heal Dashboard,” click Quick Heal icon on your computer.
• Click Parental Control option. A new page will open.
• You can either select “ All Users” or “Specific Users” as per your wish.
• Choose “Apply to all Users” if you want to apply this setting for all the users.
• To apply this setting for multiple specific users, select “Apply to specific User,” and then select the Configure option.
• After the configuration, the dialog box will open. In this Quick Heal installer dialog box, you can see three options.
• Option 1: Restrict access to particular categories of website
• Click category and choose the options depending on your opinion.
• Save the changes you have made.
• Option 2: Restrict access to a particular website
• Press “Add” option, a dialog box will open.
• Enter the domain name of the website which you want to block, and then Click OK to save the changes you made.
• Option 3: Schedule Internet Access
• Press “Allow access to the internet as per the schedule” to fix a day and time for internet access.
• Now, click OK to apply the changes.

To enable and configure safe browsing in Quick Heal, follow these steps.

• Select Quick Heal Anti-virus from the Dashboard.
• Now, click Internet & Network option.
• Internet & Network screen will open to turn on the Browser Sandbox.
• Select the security level options as per your requirement
• Option 1: Prevent the browser from accessing confidential folders
• Choose this option to protect your sensitive data like a bank statement, pictures, and relevant documents, while you are surfing.
• Option 2: Prevent the browser from modifying the protected data
• Select the folder which you wish to protect from being manipulated.
• Option 3: Allow browser to store all downloads in the specific folder
• It will help you to use the downloaded contents or documents for future needs in a particular folder
• To ensure that your browser is running in Browser Sandbox, click “Show green border around browser window.”
• Choose the delete option to clean the Sandbox cache.
• To save the settings you made, click Save changes.

Anti-phishing software helps to identify phishing content and prevents launching of fraudulent websites.

• Choose Enable Anti-phishing to activate Quick Heal anti-phishing and then press OK to save the changes.
• To run Quick Heal Anti-phishing, follow these Quick Heal installer steps.
• Launch Internet Explorer. Click Tools and then choose the Internet option.
• Click Custom Level and the go to the Security tab.
• Now, go to Scripting section to enable Active Scripting.
• Press the OK option to save these settings.
• Press Advanced tab option and then select Enable third-party browser extension.
• To disable internet explorer’s anti-phishing and to enable Quick Heal anti-phishing, click Quick Heal anti-phishing
.

• To enable and configure safe banking in Quick Heal, follow these Quick Heal installation steps.
• Open the Quick Heal Dashboard, and select Quick Heal anti-virus.
• Now, click Internet & Network option.
• Choose “Safe Banking” followed by select the options as per your requirement.
• Option 1: Protect against DNS based attacks
• This option protects your device from visiting fraudulent websites.
• Option 2: Allow clipboard sharing
• This option is to allow clipboard sharing.
• Option 3: Keyboard shortcut for switching between Windows desktop and Safe banking desktop.
• Choose this option for launching secure banking in a secluded environment. You will not able to access any system from this window. This option will also provide a shortcut to switch from Secure banking desktop to Windows desktop.

Quick Heal Browser Sandbox helps you protect your computer from malicious sites as you browse the internet. Follow the Quick Heal installer guidelines mentioned below to enable and set up Quick Heal Browser Sandbox

• Go to the computer on which Quick Heal Antivirus has been installed.
• Launch the Quick Heal Antivirus by double-clicking the icon.
• Navigate to the dashboard and click on Internet & Network.
• Go to the Internet & Network screen. Switch Browser Sandbox ON.
• Now, click the drop-down list beside Browser Sandbox security level and select the required security level.
• Click on the checkboxes such as the ones which prevent the browser from accessing confidential folders, modifying protected data, and allowing the browser to store downloads in the specified folder. Click the Folders buttons beside the checkboxes to configure these settings.
• Click on Save Changes and close the Quick Heal Antivirus window.

Quick heal Antivirus can prevent keyloggers from accessing confidential information which is entered in browsers during bank transactions over the internet. This feature is called Safe Banking, and the guidelines mentioned below will help you set it up and configure it.

• Open the Quick Heal Antivirus software.
• Navigate to the Quick Heal application's dashboard and click on Internet & Network.
• Choose the Safe Banking option. Protect against DNS based attacks, Clipboard Sharing, and Keyboard Shortcut Preferences are the choices provided here. The first option helps to protect your computer from accessing fraudulent websites. The second option helps to allow sharing of clipboard content from desktop to safe banking or vice-versa. The third option helps you switch between the Desktop and Banking transaction screen to access the files.
• Click Save Changes. To launch this feature, right-click the Quick Heal icon on the system tray, and choose Safe Banking. You can choose Add Bookmark, type the URL of the website you want to access, and click Add. You can use the View Bookmark option to view the bookmarked URL.

The Anti-theft option provided by Quick Heal Antivirus locks your device if the SIM is changed, displays a message when the device is blocked, and sends a message to an alternative number to alert the user that the device has been stolen. To enable this option, follow the Quick Heal installer guidelines mentioned below.

• Navigate to the Login screen of Quick Heal Remote Device Management.
• Log in with your Quick Heal credentials, go to Settings, and choose Anti-theft.
• Choose the ON option to turn Anti-theft ON.
• Choose the Lock on SIM change option to lock the device when someone changes the SIM.
• Select the Use default message option, write a message to make the application display this message on the Quick Heal installation steps screen of the blocked device so that the person who finds the device can return it.
• Add the contact numbers in the Alternate Contacts section. These numbers will be contacted when the device gets lost or stolen. Click Save.

The Quick Heal Self Protection feature is provided to prevent the application's files from being edited or tampered with. It also ensures that the Quick Heal application's processes are up and running all the time.

Follow these guidelines to enable and configure Quick Heal Self Protection

• Launch the Quick Heal application on your device.
• Go to the Quick Heal application's dashboard and look for the Settings option.
• The Settings options will be displayed. Turn Self Protection ON to enable Self Protection.

• You can give protection to the configurations and settings of the Quick Heal installer software by enabling the Password Protection feature.
• The Password Protection feature prevents unofficial users from altering your settings.
• Go with the steps given below for turning On the Password Protection feature.
• Open the Quick Heal Total Security software on your personal computer.
• Go to the Menu tab from the Quick Heal Tablet Security Dashboard.
• Click on the General Settings option, and the General Settings dialog box will display on your screen.
• Select the Password Protection option and then enable the feature.
• Provide the required password in the Password box.
• Now, retype the same password in the Confirm Password area again and then finish the process by tapping the Save button.

• The Quick Heal installation steps on how to manage the Quarantine files using the Quick Heal installer software are provided below.
• Navigate to the Quick Heal Tablet Security application on your personal system.
• Tap the Menu icon, then select the Tools option, and then choose the Quarantine button in the Tools section.
• Choose all the files that has to be recovered and then select the Recover button for completing the process.

• The procedure on how to remove a quarantine file in the Quick Heal software is provided below.
• Open the Quick Heal Security application on your system and then select the Menu button.
• Click the Tools button and then tap the Quarantine option in the Tools window.
• Select the quarantine files that you need to remove and then click on the Delete button.